Sifiso Zulu
HV ELECTRICIAN
Richards bay,KZN
Summary
As a seasoned electrical engineering professional, I possess a rich blend of experience and deep expertise that I have honed since beginning my academic journey in 2003. My career took root with an N3 in electrical engineering, a solid foundation that led to a prestigious apprenticeship at Mondi Richards Bay Mill. This experience was the cornerstone of my commitment to the dynamic field of electrical engineering. I have since augmented my qualifications with a National N Diploma, supported by 360 credits, underscoring my dedication to continuous learning and professional growth. My credentials are further bolstered by my registration under SANS 10142 with the Department of Labour, enabling me to issue Certificates of Compliance and affirming my strict adherence to industry standards and regulation. Currently, I am on a steadfast path to achieving my GCC Qualification by 2027 at the latest. My career trajectory is characterized by an unwavering commitment to excellence. I am keen to leverage my comprehensive skill set and progressive mindset to tackle new challenges and seize fresh opportunities.
Overview
18
18
years of professional experience
2069
2069
years of post-secondary education
5
5
Language
Work History
HV ELECTRICIAN
RBCT Coal Terminal
11.2024 - Current
- Conduct HIRA, necessary permit to operate, Switch off, Isolate, Linking and safety test before conducting all work, that's including applying system and portable earths
- Daily plant visual inspection, paying attention to every detail.
- Load defects notification on SAP and plan execution based on priority.
- Draw up spares required to do maintenance and scope necessary resources for the well execution of the task.
- Planning, scheduling and execution of work on MV/HV systems.
- Installation and maintenance of all electrical apparatus in the plant.
- Experience on various protection relays, switchgear, transformer feeders, RMU'S, MINI-Subs (RM6)
- Experience on secondary protection relay injection testings using Isa injector.
- Electrical substation experience, keeping the standard as per the regulation.
- Holding a Wiremen's license card and registered to the DOL as an Issue of COC's.
- Experience on battery charger inspections and fault finding (both dry and wet cells).
- Experience on programming, troubleshooting on Siemens PLC logics.
- Condition monitoring work ,Online and offline PD scan on 3.3kV and 11kV substations.(Ultrasound)
- IR inspection on all 220V 400V 550V circuits in the MCC.
- Experience on communication network (TCP/IP) devices and principles.
- Involved in projects work, transformers purchasing, installation, and commissioning.
- MV Circuit breaker maintenance, speed testing, coil replacement, control cards, contact resistance testings.
- Experience on ring units circuits, Schneider RM6 switchgear Mini-Subs.
- Experience on underground MV cables fault finding and repairs.
- Experience on Cable thumping using a Bauer machine and TDR, cable fault distance location.
- Experience on using Digiphone and other technologies to locate and find underground cable faults.
- Protection relays Secondary injection and keeping back up files
- Experience on Harmonics filters (Capacitor bank) PFC maintenance, testing and replacement.
- Conduct daily plant inspections, ensuring meticulous attention to detail.
- Managed defect reporting in SAP, prioritized maintenance, and resource planning.
- Executed MV/HV system work, including installation and maintenance of electrical apparatus.
- Led projects on transformer procurement and commissioning, and maintained protection relays.
- Conducted daily plant inspections, ensuring meticulous attention to detail.
- Transformer inspections and maintenance, oil top up, oil sampling and purification, silica gel change and recording winding and oil temperatures.
- Managed defect reporting in SAP, prioritized maintenance, and resource planning.
- Executed MV/HV system work, including installation and maintenance of electrical apparatus.
- Sign of permits system, switch back power on and records kept on SAP.
- Conducted HIRA, ensured operational permits, and performed safety tests including system earthing.
- Managed SAP defect reporting, prioritized tasks, and planned resources for electrical maintenance.
- Oversaw MV/HV installations, maintained electrical apparatus, and led transformer commissioning.
- Executed protection relay tests, MV cable fault repairs, and harmonics filter maintenance.
HV ELECTRICIAN
Mondi Paper Group (Richards Bay )
03.2007 - 10.2024
- Executed comprehensive High-Risk Assessment (HIRA), ensuring minimized operational risks through stringent safety protocols and regulation adherence.
- Spearheaded High Voltage (HV) maintenance, including intricate switching, power management, and load distribution, ensuring optimal mill operations.
- Proficient in maintenance of HT infrastructure such as power towers, incoming lines, outdoor capacitor banks, and line protection reactors.
- Skilled in the upkeep of critical HV components, including porcelain insulators, circuit breakers, earth switches, and surge arrestors.
- Conducted meticulous condition monitoring of HV apparatus, partial discharge analysis, and coordinated repair outages.
- Managed maintenance and fault diagnosis for Steam and Gas turbines, synchronizing Mondi power with Eskom grid to maintain compliance.
- Monitored power distribution networks, adeptly interpreting SCADA alarms and executing necessary interventions.
- Performed regular plant inspections, prioritizing defects in SAP for planned resolution based on criticality.
- Installed, maintained, and tested all HT electrical equipment, ensuring plant reliability and safety.
- Implemented root cause analysis and preventative maintenance strategies, informed by detailed equipment failure records.
- Demonstrated expertise in HT communications protocols, including fiber optics, Ethernet, VLAN, and TCP/IP device integration.
- Oversaw power network monitoring, planned maintenance schedules, and efficiently handled outages and breakdowns.
- Gained proficiency with ABB protection relays, transformer feeders, motors, and busbar systems.
- Skilled in motor starter DCS systems, alarm interpretation, and operational history analysis.
- Maintained Silicon Engineering battery chargers, including DC trip voltage troubleshooting and unit maintenance.
- Conducted protection testing on relays, performed secondary injections, and maintained meticulous record-keeping.
- Experienced with SF6 and oil-type outdoor circuit breakers, performing functionality testing and component repairs.
- Managed transformer maintenance, including oil sampling, cooling systems, and gasket/seal replacements.
- Directed transformer protection device testing, ensuring operational readiness during substation planned shutdowns.
- Supervised contractor-led transformer oil sampling and purification, documented actions based on lab results.
- Maintained PFC capacitors, managed isolation/testing, and ensured safe plant operations post-maintenance activities.
Education
ELECTRICAL ENG. DIPLOMA - Electrical Engineering
Richtek College (Umfolozi)
TVET COLLEGE08-2023
Amajuba Trade Finishing
Trade Finishing Centre 04.2001 - 01.2010
National N Diploma - Electrical Engineering
Umfolozi College
03.2006 - 08.2024
Working Towards A GCC Qualification -
TVET COLLEGES
03.2006 - 08.2024
Skills
Cable faultfinding and repairs (THUMPING)
Interests
Reading books
Doing research
Personal Information
- Date of Birth: 08/30/85
- Nationality: South African
- Driving License: Code 10
- Marital Status: Single
About Me - Summary
As a seasoned electrical engineering professional, I possess a rich blend of experience and deep expertise that I have honed since beginning my academic journey in 2003. My career took root with an N3 in electrical engineering, a solid foundation that led to a prestigious apprenticeship at Mondi Richards Bay Mill. This experience was the cornerstone of my commitment to the dynamic field of electrical engineering. I have since augmented my qualifications with a National N Diploma, supported by 360 credits, underscoring my dedication to continuous learning and professional growth. My credentials are further bolstered by my registration under SANS 10142 with the Department of Labour, enabling me to issue Certificates of Compliance and affirming my strict adherence to industry standards and regulation. Currently, I am on a steadfast path to achieving my GCC Qualification by 2027 at the latest. My career trajectory is characterized by an unwavering commitment to excellence. I am keen to leverage my comprehensive skill set and progressive mindset to tackle new challenges and seize fresh opportunities.
Reading books and do reseach
Reading books and do reseaches...
Timeline
HV ELECTRICIAN
RBCT Coal Terminal
11.2024 - Current
HV ELECTRICIAN
Mondi Paper Group (Richards Bay )
03.2007 - 10.2024
National N Diploma - Electrical Engineering
Umfolozi College
03.2006 - 08.2024
Working Towards A GCC Qualification -
TVET COLLEGES
03.2006 - 08.2024
Amajuba Trade Finishing
04.2001 - 01.2010
ELECTRICAL ENG. DIPLOMA - Electrical Engineering
Richtek College (Umfolozi)
Similar Profiles
Tshianeo NethonondaTshianeo Nethononda
Operations Manager at RICHARDS BAY COAL TERMINAL – RBCTOperations Manager at RICHARDS BAY COAL TERMINAL – RBCT
Quintin ByrdQuintin Byrd
Barge Loadout at Calvert City Coal TerminalBarge Loadout at Calvert City Coal Terminal
Alex CrottiAlex Crotti
Operator at Port Kembla Coal TerminalOperator at Port Kembla Coal Terminal
Thabiso MbuyaziThabiso Mbuyazi
Office Administrator at Khonzi EngineeringOffice Administrator at Khonzi Engineering
Lindelani MagubaneLindelani Magubane
Teacher's Assistant at NATeacher's Assistant at NA