Matshela Mohlakore

• 2010 Aviation Safety Promotion
• 2011-2014 Airworthiness Inspector Large Aircraft
• 2015-2025 High/Low-Capacity Inspector Airworthiness

• Basic Military Training Air Force Gymnasium 06/05/98-14/08/98
• Junior NCO 27/11/98
• Aircraft Mechanic Qualified SAAF 2001
• Aircraft: Aerospatiale Alouette III & Oryx Helicopter. CASA 212
• Cessna Citation II (550), Falcon 50B 900, Boeing 737 BBJ
• Diagnosed and repaired mechanical issues using advanced diagnostic tools and equipment.
• Provided quality assurance oversight for fellow mechanics'' work, ensuring adherence to established standards and procedures.
• Increased aircraft reliability by performing thorough inspections, diagnosing issues, and repairing or replacing necessary components.
• Performed aircraft maintenance for scheduled preventive actions and unscheduled requirements.
• Conducted thorough inspections and maintenance of aircraft systems to ensure operational readiness.
• Developed maintenance documentation and reports for senior management review, facilitating informed decision-making processes.
• Recorded maintenance actions in aircraft logbooks.
• Supported operational readiness by conducting comprehensive pre-flight and post-flight inspections to ensure proper functioning of aircraft systems.
• Developed strong working relationships with pilots and flight crews, fostering open communication channels to address any concerns or questions about aircraft performance.
• Performed corrosion control measures on various aircraft components, preserving structural integrity and prolonging service life.
• Conducted detailed engine inspections, identifying wear patterns early to prevent costly damage or failures down the road.
• Conducted detailed inspections of aircraft structures to identify and rectify potential issues, preserving structural integrity.
• Supported aircraft modifications to meet evolving operational needs, ensuring fleet versatility and readiness.
• Improved flight readiness with meticulous engine overhauls and system diagnostics.
• Troubleshot mechanical, hydraulic, pneumatic and electrical systems and tested equipment following repairs.
• Read and interpreted aircraft documentation to determine repair feasibility and methods.

Airworthiness Inspector ensures aircraft meet safety standards and regulations through inspections, audits, and investigations. Their responsibilities include verifying aircraft maintenance, reviewing documentation, and enforcing compliance with airworthiness directives. They may also participate in accident investigations and recommend corrective actions

• Executed routine inspections and maintenance on aircraft systems to ensure compliance with safety regulations.
• Diagnosed mechanical issues using advanced troubleshooting techniques and industry-standard tools.
• Collaborated with cross-functional teams to coordinate repair schedules and minimize aircraft downtime.
• Developed and implemented maintenance plans, improving operational efficiency and reliability of aircraft fleet.
• Mentored junior engineers on maintenance procedures and best practices, enhancing team skillset and performance.
• Streamlined documentation processes for maintenance records, ensuring accuracy and adherence to regulatory standards.
• Led root cause analysis for recurring mechanical failures, driving initiatives for continuous improvement in operations.
• Conducted regular training sessions for fellow engineers on new technologies, tools, or methodologies relevant to the industry.
• Coordinated with suppliers for timely procurement of parts, optimizing inventory management and reducing costs.
• Contributed to the successful completion of numerous aircraft overhauls by providing expert guidance and hands-on support throughout all stages of the project.
• Enhanced team productivity with consistent communication, collaboration, and effective delegation of tasks.
• Reduced aircraft downtime by conducting thorough inspections and promptly addressing any issues found.
• Championed continuous improvement initiatives resulting in enhanced workflow efficiency among the maintenance team.
• Acted as a liaison between maintenance team and upper management to effectively communicate progress, challenges, and achievements.
• Boosted overall team performance by establishing clear expectations, providing constructive feedback, and fostering a supportive work environment.
• Managed complex repair projects, coordinating resources and personnel to ensure timely completion within budget constraints.
• Collaborated with other departments to develop comprehensive strategies for fleet-wide preventative maintenance programs.
• Increased safety standards by rigorously adhering to regulatory guidelines and promoting a culture of accountability within the team.
• Mentored junior engineers, providing guidance on best practices and sharing expertise in aircraft maintenance techniques.
• Spearheaded troubleshooting efforts, quickly identifying root causes of technical issues and implementing solutions to prevent recurrence.
• Performed meticulous record-keeping, maintaining detailed logs of all maintenance activities for audit purposes and future reference.
• Implemented cost-saving measures by optimizing resource utilization during scheduled aircraft maintenance checks.
• Maintained advanced knowledge of various aircraft systems by attending workshops and staying current on industry trends.
• Improved aircraft maintenance efficiency by streamlining processes and implementing time-saving strategies.
• Performed scheduled and unscheduled inspections to check flight readiness of aircraft.
• Operated power tools, gauges and testing equipment to adjust, repair, and replace faulty components in aircrafts.
• Removed components such as landing gear, engines, and flight control.
• Performed scheduled and unscheduled maintenance on diverse aircraft engines, avionics and hydraulics.
• Evaluated individual aircraft components to identify and troubleshoot issues.
• Maintained repair logs to document all corrective and preventive aircraft maintenance.
• Inspected airframes to detect wear and other defects.
• Inspected all received aircraft parts to verify compliance with NAA regulations.
• Analyzed engineering drawings and schematics to troubleshoot systems and diagnose solutions.
• Diagnosed faults and developed resolution plans.
• Obtained fuel and oil samples to check for contamination.
• Lubricated shafts, bearings, and gears to maintain optimal performance.
• Maintained, repaired and rebuilt aircraft structures and fuel, electrical, and oxygen systems.
• Performed flight line AFE preflight and postflight requirements.
• Troubleshot mechanical, hydraulic, pneumatic and electrical systems and tested equipment following repairs.
• Recorded maintenance actions in aircraft logbooks.
• Read and interpreted aircraft documentation to determine repair feasibility and methods.
• Examined and tested aircraft parts, components and systems to verify airworthiness and functionality.
• Removed and installed aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, and mechanical flight controls.
• Collaborated with colleagues in developing and refining maintenance procedures.

• Conducted detailed inspections to ensure compliance with safety and quality standards.
• Developed inspection processes that improved overall efficiency and accuracy of assessments.
• Trained and mentored junior inspectors on best practices and inspection protocols.
• Analyzed inspection data to identify trends, leading to proactive measures for quality improvement.
• Collaborated with cross-functional teams to address compliance issues and implement corrective actions.
• Implemented new inspection technologies, enhancing accuracy and reducing processing time.
• Led periodic audits to ensure adherence to regulatory guidelines and internal policies.
• Streamlined reporting procedures, improving communication of findings to stakeholders.
• Prepared reports detailing findings of inspections, investigations, and tests.
• Ensured compliance with industry regulations through meticulous attention to detail during inspections.
• Upheld codes and regulations governing materials, processes, and procedures.
• Delivered detailed reports on findings from inspections, helping stakeholders understand areas requiring attention or improvement in order to maintain regulatory compliance.
• Improved quality assurance procedures to minimize errors and increase effectiveness of inspections.
• Identified potential hazards and recommended corrective actions, ensuring a safer work environment for all employees.
• Maintained up-to-date inspection and audit records for improved reporting and analysis.
• Mentored junior inspectors, sharing industry expertise to enhance their skills and abilities in performing thorough inspections.
• Identified repair and upgrade requirements needed to meet safety and quality standards.
• Inspected and examined materials and finished parts and products for defects and wear to verify conformance with blueprints, diagrams, and template specifications.
• Enhanced company safety standards by conducting thorough inspections of equipment and facilities.
• Reduced the frequency of defects by closely monitoring production processes and identifying areas for improvement.
• Effectively communicated with clients and management to ensure alignment on inspection objectives, requirements, and expectations.
• Streamlined inspection processes for faster turnaround times, resulting in increased productivity.
• Conducted detailed building structure inspections to identify and resolve potential risks.
• Managed multiple concurrent projects successfully while adhering strictly to deadlines.
• Maintained accurate records of all inspections performed, allowing for more informed decision making regarding maintenance schedules and resource allocation.
• Developed customized inspection checklists tailored to specific job sites, ensuring thorough evaluations.
• Facilitated cross-departmental collaborations to address and rectify compliance issues identified during inspections.
• Identified and addressed safety risks during routine inspections, significantly reducing workplace accidents.
• Conducted detailed quality checks for manufacturing processes to ensure compliance with industry standards and regulations.
• Reduced environmental impact with rigorous enforcement of environmental standards during site inspections.
• Provided expert guidance to companies on how to rectify issues found during inspections, leading to improved practices.
• Advocated for continuous improvement, leading by example through meticulous and proactive inspection work.
• Streamlined inspection processes, reducing inspection times without compromising on thoroughness or accuracy.
• Customized inspection checklists to specific project needs, ensuring comprehensive evaluation of all critical factors.
• Implemented digital reporting system to expedite feedback on inspection outcomes, enhancing operational efficiency.
• Contributed to development of industry guidelines by participating in forums and panels on best inspection practices.
• Fostered positive relationships with businesses and regulatory bodies, facilitating smoother inspection processes.
• Maintained up-to-date knowledge of regulatory changes to ensure inspections were conducted in line with current laws.
• Increased compliance rates, meticulously auditing company practices against regulatory requirements.
• Enhanced safety protocols by conducting thorough inspections of construction sites to identify and mitigate potential hazards.
• Led training sessions for junior inspectors to elevate team's overall efficiency and accuracy in conducting inspections.
• Enhanced team's inspection capabilities by introducing new methodologies and best practices.
• Coordinated with project managers to schedule inspections at critical phases, ensuring timely completion without delays.
• Achieved high levels of stakeholder satisfaction by providing detailed reports and actionable recommendations post-inspection.
• Followed standard operating procedures for inspections and tests.
• Trained other workers in inspection and testing procedures.