Leon Lambrechts

• Inspection and surveys for whole SBM FPSO fleet offshore:
• Brazil
• Guyana
• Angola
• Equatorial Guinea

- Conduct:

• Fabric Maintenance Planning and Management
• Inspection and Survey
• Coating Specification

Reference: Scott Gardner (Cell: +27 83 611 2539)

• Conforming to all acceptance criteria via the specification/ method statements to allow wet abrasive blasting before shotcrete and coating to be applied
• Recordings of all environmental conditions
• Recordings of Wet abrasive blasting surface profile (CSP standards)
• Witnessing of shotcrete and coating systems
• Recordings of all DFT’s (Coating)
• Witnessing Phenolphthalein & adhesion testing
• Conducting soluble salt tests as required via specification
• Witnessing all core tests conducted
• Signing off on all data packs/ Reports before handing over to client
• Inspection of all scoping (Hammer Test) of cooling tower 245A
• Working at heights
• Material used on project: Concrete & Coatings
• Sika MonoTop 610
• Sika MonoTop 412 NFG
• Sikalastic 152 (Final Top Coat)
• Wet Abrasive Blasting grit – Blastrite B90 grit & high pressure water jetting
• Method of application: Shotcrete (Guniting)
• Reference: Daniel Ryding, Cell: (+27) 076 819 2486, E-mail: daniel@dpaconsult.co.za

• Conforming to all acceptance criteria via the specification to allow blasting and then coating or lining of all tanks and pipes
• Recordings of all environmental conditions
• Recordings of blasting surface profile
• Witnessing of coating or lining systems
• Recordings of all DFT’s
• Recordings of all dust and debris
• Conducting soluble salt tests as required via the specification
• Signing off on all data packs beforehand overt to client
• Inspection of tank roof tops
• Working at heights
• Material used on project: STONCOR
• Carbozinc 859 (Primer)
• Carboguard 880 (Intermediate)
• Carbothane 134 (Final Top Coat)
• Blasting grit – Ecoblast & Blastrite B60
• Method of application: Conventional spray, Airless Spray
• Reference: Kobus Oosthuizen, Cell: (+27) 076 062 3523, E-mail: kobus@corrosioncontrol.co.za

• Conforming to all acceptance criteria via the specification to allow blasting and then coating or lining of all tanks and pipes
• Recordings of all environmental conditions
• Recordings of blasting surface profile
• Witnessing of coating or lining systems
• Recordings of all DFT’s
• Recordings of all dust and debris
• Conducting soluble salt tests as required via the specification
• Signing off on all data packs beforehand overt to client
• Inspection of tank roof tops
• Working at heights
• Material used on project: STONCOR
• Carbozinc 859 (Primer)
• Carboguard 193 (Intermediate)
• Carbothane 134 (Final Top Coat)
• Blasting grit – Ecoblast & Blastrite B60
• Method of application: Conventional spray
• Reference: Johan Kriel (Project Manager), Cell: (+27) 076 129 5182

• Conforming to all acceptance criteria via the specification to allow blasting and coating of all pipes
• Recordings of all environmental conditions
• Recordings of blasting surface profile
• Witnessing of coating system application on all flanges and spools
• Recordings of all DFT’s
• Recordings of all dust and debris
• Conducting soluble salt tests as required via the specification
• Completion of all coating data packs (ISO’s), before hand over and signing off final inspection for release and delivery to site
• Application method of paint by conventional spray
• Coordinating and managing of x1 team of 16 personals for the production line and quality
• Welding experience
• Visual inspection of the welding conducted
• To confirm that weld conforms to the welding specification before coating can continue
• Material used on project: STONCOR
• Carbozinc 11 (Primer)
• Carbozinc 859 (Primer)
• Carboline 193 (Intermediate)
• Carbothane 134 (Final Top Coat)
• Blasting grit – Ecoblast & Blastrite B60
• Method of application: Conventional spray
• Reference: Johann Viljoen, Cell: (+27) 82 855 7480, E-mail: johann@jviservices.co.za

• Conforming to all acceptance criteria via the specification to allow all sites to be coated
• Recordings of all environmental conditions
• Witnessing of x3 coating system application on all welds, flanges and spools
• Recordings of all DFT’s
• Completion of all painting data packs, before hand over
• Application method of paint by brush & roller
• Welding experience
• No welding responsibilities
• Only coating
• All blasting and 1st coat (Primer) applied in workshop, Vanderbiljpark – Gauteng
• Material used on project: STONCOR
• Carbozinc 859 (Primer)
• Carboguard 193 (Intermediate)
• Carbothane 134 (Top Coat)
• Carbomastic 186 (Primer/Intermediate) used on site
• Reference: Louis Storm, Cell: (+27) 82 317 7028, E-mail: Louis@redec.co.za

• Comprehensive Inspector representing ATB Riva Calzoni Contracting on the Massingir Dam water scheme project (Mozambique)
• Witnessing and acceptance of Non-Destructive Testing and Destructive testing
• Inspection of welds and joints and internal linings via the QCP
• Witnessing welding via the WPS
• Assisting with TOFD
• Dye Pen Testing and MPI
• Fit up and alignment before welding commences
• Coordinating of x3 technicians
• Quality control of all documentation and data packs
• Signing off before handing over to client
• Experience: Coating systems and their application methods
• Destructive and Non-Destructive Coating tests and test procedures
• Good understanding and utilization of Coating thickness equipment and its limitations
• Inspection reporting
• Familiar with ISO, SSPC, NACE, ASTM, Codes and Standards
• Basic understanding of cathodic protection
• Co-ordination, supervision and planning
• Supervision of beveling preparation before fitting up
• Supervision of welding joints preparation
• Supervision of piping fit up before welding according to the approved drawing
• Supervision of the WPS correct parameters during the welding activities
• Visual inspections to mark out defects
• Monitor repair process
• Wall thickness measurements on parent material
• Monitor consumables storage and usage
• Skilled and understanding, but no certification in: Dye Pen testing, MPI, TOFD
• Material used on project: Jotun – Jotamastic 87 & 90, Jotun – Hard Top Flexi
• Airless Spray
• Reference: Luca Donadei, Cell: (+39) 338 930 9155, E-mail: luca.donadei@atbrc.com

• Quality control of the whole project for external, internal work regarding coating and lining of all pipes
• Flanges, joints, Air valves and crotch plates
• Destructive testing and non-destructive testing
• Monthly, weekly and daily planning with production to achieve progress targets
• Managing of X3 groups with 8 people in a group for different sections with x3 super visors
• All coating and lining documentation and signing of reports before handing over to the client
• Material used on project: Sigma 523 & Sigma 588, Poly clad 777, Denso Primer, Bitumen Wrap
• Reference: Mervyn Shaw, Cell: 072 178 2365