Anthony MILLINGHAM
Offshore/Onshore Oil&gas Proffesional
Cape Town
Summary
Organized and dependable professional with a proven ability to manage multiple priorities while maintaining a positive attitude. Offers hands-on experience in onshore and offshore operations, demonstrating skill in navigating challenges effectively. Strong problem-solving skills and a proactive approach to new tasks ensure success in dynamic environments. Recognized for adaptability, creativity, and a results-oriented mindset, committed to advancing organizational goals through meaningful contributions.
Overview
20
20
years of professional experience
Work History
Client Rep
SUBSEA7 - Ndungu
10.2025 - 11.2025
- Monitored pipe load out.
- Attended daily coordination meetings with the Client, Company, And Subcontractors.
- Review load-out procedures and lifting plans before work commenced
- Supervised key lifting and load-out activities to ensure safe and correct Execution.
- Reported daily progress and raised any issues or delays.
- Ensured all work followed Health, Safety, and Environmental (HSE) rules and Standards
- Supported the team to improve efficiency and keep the project on schedule.
- Ensure all Seafastening is as per Seafastening plan.
Base Lead
SUBSEA7 - Clov 3
08.2025 - 09.2025
- Oversee and manage daily onshore base operations to support offshore work.
- Lead daily meetings with engineers, riggers, port captain.
- Monitor fabrication of spools and report progress daily.
- Ensure MOC ARE raised should ther be a need for.
- Ensure barges are prepared and ready for load-out and seafastening is as per plan.
- Ensure Non conformance Report raised if reqiured.
- Monitor logistics for equipment, materials.
- Contribute to Client safety culture and ensure all HSE rules are followed.
- Keep track of all equipment and materials using inventory systems
- Prepare daily/weekly reports on base activities and progress.
- Self-motivated, with a strong sense of personal responsibility.
CONSTRUCTION LEAD
BOURBON - Baobab
01.2025 - 02.2025
- Mobilize Vessel in preparation for offshore operations.
- Survey of mooring lines and Risers. Subsea valve, HFL/EFL operations.
- Recovery of Goosenecks.
CONSTRUCTION LEAD
SAIPEM - Koambo Norte
10.2024 - 11.2024
- Survey of mooring lines with the assistance of divers.
- Coordinate daily with the client and diving team.
- Ensure all relevant documentation is in place.
- Oversaw daily construction activities, ensuring work was performed according to specifications and industry standards.
BRIDGE SUPERVISOR
SKYBORN - YUNLIN
03.2024 - 07.2024
- Mobilisation of the vessel.
- Coordinated with construction teams to ensure timely completion of vessel mob
- Boosted employee morale with recognition programs that acknowledged outstanding performance within the team.
- Installation of XXL Monopiles
- Planning of daily activities
- Demob of vessel
- Checked equipment to determine if maintenance was required.
- Oversaw daily operations at site, keeping team production moving at optimal pace.
LOAD OUT SUPERVISOR
SUBSEA7 - SAKARAYA
07.2022 - 12.2022
- Plan and coordinate daily activities to meet project targets.
- Ensure all documentation is in place prior to starting any operation. Attend daily meetings and TBT.
- Manage and coordinate multiple disciplines and ensure all safety and quality standards and procedures are in place. Marine Operations.
- Preparation of barges for load out.
- Monitor and supervise the assembly of rigging for subsea structures. Loading of all structures onto barges in preparation for offshore operations.
- Yard activities:
- Monitor Site integration tests.
- Ensure all equipment is certified.
- Prepare all structures for loading onto barges.
CONSTRUCTION LEAD
TECHNIP - CORAL
01.2022 - 06.2022
- Oversee all work during mobilization.
- Recovery of risers
- Set up of pre commissioning spread
- Monitor pre comm activities
- Mentored junior staff members, fostering an environment of growth and continuous improvement within the team.
- Provided feedback to workers on job performance and safety procedures.
SHIFT SUPERVISOR
SUBSEA 7 - LINGSHUI
02.2021 - 05.2021
- Preparation for SCR pull-in.
- Recovery of Riser
- Diving operation
- Maintained workplace safety by enforcing strict adherence to company policies and industry regulations.
- Provided ongoing support to employees during challenging situations, offering guidance on problem-solving techniques for improved efficiency outcomes.
SHIFT SUPERVISOR
SUBSEA 7 - PFLNG 2
02.2020 - 05.2020
- Mooring of FLNG – SOFEC External Turret
- Tensioning of mooring lines
- Recovery of risers
- Pre-comm activities
- Installation of spools
- Enforced company policies and regulations with employees.
DECK / SHIFT SUPERVISOR
SUBSEA 7 -PFLNG2 (site Integration Test)
01.2020 - 01.2020
- SIT:Function test of Winches
- Rotation test of the Turret
- Inclination test of the Chain stopper assembly.
- Function test of the Chain handling equipment.
- Verify the routing of the winch wire.
- Verify the operation of Vertical and Horizontal sheaves
- Simulation of chain passing through all 12 Chain Stopper assemblies
- Sea-fastening of Chain stoppers in preparation for sail.
- Compile a list of all equipment to be used for the Offshore operation.
SITE SUPERINTENDANT
SUBSEA 7 - PFLNG2
04.2019 - 09.2019
- Oversee all work on site.
- Preparation of the work site and equipment for Offshore operation.
- Upending of Suction piles and installation of rigging.
- Flaking of chain and connecting to Delta plates
- Preparation of Barges.
- Loading of Barges in preparation for Offshore campaign.
- Conducted thorough site inspections to identify potential issues early on and implement corrective actions as needed.
- Worked closely with clients to coordinate site work and resolve issues.
- Coordinated subcontractor activities efficiently ensuring proper sequencing of work according to project schedule requirements.
CONSTRUCTION LEAD
SAIPEM - KOAMBO SUL
09.2018 - 04.2019
- Preparation work:Onshore SEMBCORP MARINE YARD
- -Planning of daily operation.
- -Installation of rigging in Preparation of Chain stopper deployment.
- -Install monitoring equipment- camera for clacker monitoring.
- -Installation of Towing Gear.
- -Procurement of equipment related to the project. Review and comment on procedures.
- -Mobilization of FPSO.
- Sea Trials/ Site Integration Test:
- -Deployment of the Chain stopper. (Blue water internal turret).
- -Record and compile a report.
- Offshore operations.
- -Connecting of tugs.
- -Preparation for Mooring of FPSO.
- -Chain stopper deployment.
- -Mooring of FPSO – 9 Mooring Legs – Internal turret
- (Blue Water) Final tensioning of Mooring Lines.
- -Installation of Umbilicals, Risers. Pre-commissioning assistance.
- Reduced safety incidents by conducting regular site inspections and enforcing strict adherence to safety guidelines.
- Inspected completed work to verify quality standards and compliance with criteria.
SUPERINTENDENT
SAIPEM - KOAMBO NORTE
12.2017 - 07.2018
- Preparation work:SEMBCORP MARINE YARD
- -Planning of daily operation.
- -Installation of rigging in Preparation of Chain stopper deployment.
- -Install monitoring equipment- camera for clacker monitoring.
- -Installation of Towing Gear. Procurement of equipment related to project.
- -Review and comment on procedures.
- -Mobilization of FPSO.
- Sea Trials/ Site Integration Test:
- -Deployment of Chain stopper. Blue water internal turret.
- Record and compile report. Offshore operations.
- Connecting of tugs.
- Preparation for Mooring of FPSO.
- Chain stopper deployment. Mooring of FPSO – 9 Mooring Legs – Internal turret, final tensioning of Mooring Lines.
- Installation of Umbilical’s, Risers.
- Pre-commissioning activities.
SHIFT SUPERVISOR
Alam Maritim - PFLNG 1
05.2016 - 06.2016
- Prepare PGLNG for offshore installation.
- Mooring and Hook up of PFLNG.
- Pre comm activities
- Installation of spools
- Maintained workplace safety by enforcing strict adherence to company policies and industry regulations.
- Provided ongoing support to employees during challenging situations, offering guidance on problem-solving techniques for improved efficiency outcomes.
SHIFT SUPERVISOR
PFLNG 1
05.2016 - 05.2016
- Site meetings.
- PROJECT: PFLNG 1
- Ensured smooth operations during peak hours by effectively managing resources and staff allocation.
RIGGER FOREMAN
TECHNIP - Girrasol
03.2016 - 04.2016
- Installation of MPP Umbilical.
- Raise permit-to-work.
- Supervise daily activities.
- Assist and monitoring of pre-comm works performed (pressure testing, electrical and fiber optic testing).
- Achieved accident-free projects through strict adherence to safety guidelines and fostered a culture of safety awareness among the crew members.
- Enhanced team efficiency by providing clear instructions and delegating tasks based on individual strengths.
CONSTRUCTION SUPERINTENDENT
BOSKALIS - Madura Sterling 2
09.2016 - Current
- On-shore: Singapore - Keppel Ship Yard. Perform Site Integration test for 12 leg Mooring Spread. Perform Site Integration Test for Riser installation. Assist with procurement of all equipment related to installation. Daily meetings with client on board FPSO. Review procedures. Mobilization of FPSO.
- Offshore: Madura Field - Indonesia. Planning and execution of daily activity. Hook up of FPSO. Pull in of risers and Umbilical. Pre-commissioning activities. Reinstatement of spool pieces. Task completion certificates. De-mob of FPSO. Mobilization of pre-commissioning equipment. Set up of precommissioning spread. Function test of all equipment. Testing of 16inch Gas export Riser and 10inch Main Production Riser. Flooding. Leak testing. Pigging. Drying. Packing of the lines. Testing of Offloading Hose. De-Mob of all equipment.
LOAD OUT SUPERVISOR
SUBSEA 7 - Erha North
01.2015 - 10.2015
- Supervising. Loading and offloading of supply vessels
- Prepare Barges for load out
- Loading out of jumpers.
- Oversaw daily operations of the department, ensuring smooth workflow and timely completion of tasks.
- Implemented rewards and recognition program that significantly increased employee engagement and satisfaction.
- Maintained professional demeanor by staying calm when addressing unhappy or angry customers.
SHIFT SUPERVISOR
SBM - SEA EAGLE FPSO
08.2014 - 09.2014
- Onshore operation: Mobilization of all equipment related to offshore operation.
- Liaise with customs to clear all equipment out of the warehouse.
- Preparation of deck plan, in charge of back-loading of equipment to vessel.
- Offshore operation: Repairs to swivel bearing and replacement of support leg on the Yoke.
- Preparation of all PTW’s, planning daily operations, liaise with all subcontractors.
- Preparation of the daily progress report.
- Assist with job completion documentation, management of change, and finalization
SHIFT SUPERVISOR
SUBSEA 7 - CLOV FPSO
03.2014 - 05.2014
- Responsible for the coordination of all pull-ins, umbilicals, flow lines and risers.
- On completion of tasks, follow up that all documentation is in place, task completion certificates, Task plans and handover certificates.
- Responsible for the implementation of permit to work for activities related to the project.
- Assist in the implementation and coordination of mobilisation activities.
- Liaise with client rep on board FPSO with regard to project related subjects.
- Liaise with pre-comm team on board FPSO with regards to daily activities.
- Witness electrical and pressure tests.
- Assist with the mobilisation of equipment and set up on board FPSO. On completion of task, follow up on all documentation are in place.
- Task completion certificates, Task plans and handover certificates.
- Pre-commission preparation of all precommission equipment.
- Witnessing of tests performed.
- Flooding. Leak testing. Pigging. Drying. Packing of the lines. Subsea operations.
- Monitored staff compliance with health codes, ensuring high standards of cleanliness throughout the facility consistently met or exceeded expectations.
SUPERVISOR
SAPURA ACERGY - GUMUSUT KAKAP
01.2013 - 11.2013
- Preparation works for offshore operations.
- Witness tests and installations performed by Contractor. HPU’s and commissioning of winch – Righini Chain Jack System.
- Training of personnel and familiarization of work to be performed offshore.
- Review tools and equipment and certification thereof.
- Site integration testing on mooring system and SCR Pulling.
- Fit up test on all related equipment. Witnessing of all load testing of equipment.
- Preparing of all Seafastening of equipment.
- Assist on any engineering problems that may occur.
- Pre-commission Preparation of all pre-commission equipment.
- Witnessing of tests performed.
- Flooding. Leak testing. Pigging. Drying. Packing of the lines.
SUPERVISOR
HHI - USAN
11.2012 - 01.2013
- Prepare equipment for Fair Lead replacement.
- Manage the packing of all equipment.
- Review Procedures and comment.
- Confirm all equipment is in order for offshore operation.
DECK FOREMAN
SUBSEA 7 - PSVM
03.2012 - 11.2012
- Prepare permit to work.
- Mooring of FPSO, tensioning of mooring lines.
- Coordinate all deck operations.
- Installation of spool pieces.
- Installation of valves with activators.
- Deck rigging.
SUPERINTENDENT
SAIPEM - Usan FPSO
01.2011 - 02.2012
- Witnessing the commissioning of winches.
- Load testing of deck sheaves
- Testing of overhead gantry cranes.
- Overseeing of SIT on the mooring. SIT’s on Umbilical flow lines and risers, tubing of umbilicals. SIT’s on OOL’s.
- Ordering of equipment related to the project, compiling of daily report.
- Attending daily meeting and giving feedback of progress.
ELECTRICAL TECHNICIAN / DECK FOREMAN
TECHNIP - JUBILEE
07.2010 - 12.2010
- Supervision of riggers, hydraulic and electrical technicians.
- Installation of riser pull-ins, 350t winch operation, hydraulic tools (Hydra-tight tensioning, torquing.
- Anchor Handling Tug connections.
- Pepare permits to work.
- Maintained detailed records of all repairs, maintenance tasks, and inventory for accurate tracking purposes.
- Assisted in new equipment installations, guaranteeing proper setup and optimal performance.
RIGGER / DECK FOREMAN
GLOBAL MOORING - NEPTUNE
05.2009 - 08.2009
- Connection and over boarding of suction piles with anchor shackles and chain.
- APL buoy installations, spooling and laying of spiral strands, connection and disconnection of APL buoy to clump weight,
- Subsea connections, and general rigging.
RIGGER
GLOBAL MOORING - DB1
03.2009 - 04.2009
- Connection of valves to risers, skidding of turret system, winch operations, removal and installation of gas compressors and wire guides.
- Secured safety equipment and always used gear according to requirements.
- Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
- Decreased potential hazards by promptly addressing any identified risks or issues related to rigging activities.
- Worked at heights and in confined spaces without difficulty.
- Improved lifting efficiency with proper selection of rigging equipment for specific tasks.
ELECTRICAL TECHNICIAN / RIGGER
SAIPEM - AKPO
10.2008 - 03.2009
- Preparation for mooring.
- Mooring of FPSO utilizing NOV mooring winches and Righini chain jack system.
- Preparation of NOV SCR pull in the system.
- Assist pre-comm activities.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
RIGGER
GLOBAL MOORING
11.2007 - 08.2008
- Over-boarding and preparing all rigging for suction piles, cutting of various sea-fastening on deck.
- PROJECT: GLOBAL MOORING
RIGGER
GLOBAL MOORING -NORTH EAST GATEWAY
07.2007 - 08.2007
- Installation of 16 Suction Anchors and chains, Deployed two STL Buoys (mid-water), connection of scan rope to turret on buoys.
- Maintained precise records of all rigging equipment used on projects, ensuring accurate inventory management and timely replacements when necessary.
- Assisted crane operators in making critical decisions regarding lift strategies while maintaining open lines of communication throughout the process.
ELECTRICAL TECHNICIAN / RIGGER
ACERGY - GREATER PLUTONIA
02.2007 - 05.2007
- Mooring of the greater Plutonia FPSO.
- Electrical cable installations, control panels and basic rigging.
- Mobilization for mooring of greater Plutonia FPSO.
- Operation of dolly base units and maintenance there of, operation and maintenance of A Frame and winches, daily electrical checks related to the above including HPU units.
- PROJECT: GREATER PLUTONIA
SERVICE ENGINEER / ELECTRICAL TECHNICIAN
NAMPAK
04.2005 - 01.2007
- Service and maintain all inspection coding systems used in the FMCG industry. Needs assessments on machines in order to liaise with customers regarding all technical requirements. Fault finding on all coding equipment. Stock control management of spares.
PRODUCTION AND MAINTENANCE TRAINER
COMCO SA
03.2004 - 11.2004
- Training regarding production, quality and maintenance in all aspects of good manufacturing practices. Implement training program (SDP) and preventative maintenance program. Assessment and organization of spare parts. Increase skills of operators. Increase capacity on analytical troubleshooting. Increase good daily working practices. Establish a report on the activities and abilities of machine operators.
- Evaluated the effectiveness of training initiatives by tracking participant progress and gathering feedback for continuous improvement.
- Provided one-on-one mentoring to help individuals reach their full potential within the organization.
- Facilitated team-building exercises to foster collaboration between department members.
- Mentored new hires, resulting in stronger staff development and increased productivity.
SPECIALIST ARTISAN
NAB (ABI) - COCA COLA
01.2000 - 02.2004
- General Plant Maintenance and fault finding on machinery. depalletize, palletiser, un-capper, bottle washer, electronic bottle inspectors, filling machine, filler management, carbonator, conveyer systems, AC Drives, PLC’s and building maintenance.
- PROJECT: NAB (ABI)
ELECTRICAL TECHNICIAN / INSTRUMENTATION TECHNICIAN
SA NYLON SPINNERS
02.1995 - 11.1999
- Maintenance on high speed draw winders and draw twisters.
- Fault finding on Thyristor stacks, DC and AC drives, setting up of and fault finding on inverters.
- Upgrading of electrical panels. Maintenance and fault finding on instrument valves, transmitters, setting up of level probes (inductance, tuning fork type).
- Maintenance on all compressors and pneumatic systems.
- Installed electrical conduit and wiring for power, controls, and lighting.
ELECTRICAL TECHNICIAN
MOSGAS
01.1990 - 12.1994
- Installation of all electrical equipment-motors, pumps, wiring of control panels, motor control (star delta) AC- drives, installation of cable ways. All mentioned complying within the occupational health and safety act. Experience on maintaining and performing analytical faultfinding. Been exposed to process control up to fault-finding level. (Alternators; un-interrupted power supply, valves, exposed to Scada systems).
MAINTENANCE ELECTRICIAN
UNITED TABACCO COMPANY
06.1988 - 12.1989
- General plant and building maintenance. Maintenance on all machinery in plant. Packing machines, shrink wrappers, hoists and forklifts, conveyers. PLC’s and fault finding on all machinery.
- PROJECT: UNITED TABACCO COMPANY
APPRENTICE ELECTRICIAN
PALABORWA MINING COMPANY
02.1981 - 05.1988
- Undergoing extensive training as an electrician. Electronics – high tension and low tension, starter motors, single phase, three phases, plant maintenance and in-house training.
- Qualified as a red Seal electrician
Education
Some College (No Degree) - Electrical
Cape Technicon
CapetownSkills
Goal oriented
Problem-solving
Time management
Problem-solving abilities
Multitasking
Excellent communication
Attention to detail
Problem-solving aptitude
Adaptability
Relationship building
Task prioritization
Professionalism
Teamwork
Teamwork and collaboration
Medical
In date
Seaman Book
In order
Personal Information
- Date of Birth: 10-03-1964
- Nationality: South African
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Quote
The road to success and the road to failure are almost exactly the same.
Colin R. Davis
Languages
English
Bilingual or Proficient (C2)
Timeline
Client Rep
SUBSEA7 - Ndungu
10.2025 - 11.2025
Base Lead
SUBSEA7 - Clov 3
08.2025 - 09.2025
CONSTRUCTION LEAD
BOURBON - Baobab
01.2025 - 02.2025
CONSTRUCTION LEAD
SAIPEM - Koambo Norte
10.2024 - 11.2024
BRIDGE SUPERVISOR
SKYBORN - YUNLIN
03.2024 - 07.2024
LOAD OUT SUPERVISOR
SUBSEA7 - SAKARAYA
07.2022 - 12.2022
CONSTRUCTION LEAD
TECHNIP - CORAL
01.2022 - 06.2022
SHIFT SUPERVISOR
SUBSEA 7 - LINGSHUI
02.2021 - 05.2021
SHIFT SUPERVISOR
SUBSEA 7 - PFLNG 2
02.2020 - 05.2020
DECK / SHIFT SUPERVISOR
SUBSEA 7 -PFLNG2 (site Integration Test)
01.2020 - 01.2020
SITE SUPERINTENDANT
SUBSEA 7 - PFLNG2
04.2019 - 09.2019
CONSTRUCTION LEAD
SAIPEM - KOAMBO SUL
09.2018 - 04.2019
SUPERINTENDENT
SAIPEM - KOAMBO NORTE
12.2017 - 07.2018
CONSTRUCTION SUPERINTENDENT
BOSKALIS - Madura Sterling 2
09.2016 - Current
SHIFT SUPERVISOR
Alam Maritim - PFLNG 1
05.2016 - 06.2016
SHIFT SUPERVISOR
PFLNG 1
05.2016 - 05.2016
RIGGER FOREMAN
TECHNIP - Girrasol
03.2016 - 04.2016
LOAD OUT SUPERVISOR
SUBSEA 7 - Erha North
01.2015 - 10.2015
SHIFT SUPERVISOR
SBM - SEA EAGLE FPSO
08.2014 - 09.2014
SHIFT SUPERVISOR
SUBSEA 7 - CLOV FPSO
03.2014 - 05.2014
SUPERVISOR
SAPURA ACERGY - GUMUSUT KAKAP
01.2013 - 11.2013
SUPERVISOR
HHI - USAN
11.2012 - 01.2013
DECK FOREMAN
SUBSEA 7 - PSVM
03.2012 - 11.2012
SUPERINTENDENT
SAIPEM - Usan FPSO
01.2011 - 02.2012
ELECTRICAL TECHNICIAN / DECK FOREMAN
TECHNIP - JUBILEE
07.2010 - 12.2010
RIGGER / DECK FOREMAN
GLOBAL MOORING - NEPTUNE
05.2009 - 08.2009
RIGGER
GLOBAL MOORING - DB1
03.2009 - 04.2009
ELECTRICAL TECHNICIAN / RIGGER
SAIPEM - AKPO
10.2008 - 03.2009
RIGGER
GLOBAL MOORING
11.2007 - 08.2008
RIGGER
GLOBAL MOORING -NORTH EAST GATEWAY
07.2007 - 08.2007
ELECTRICAL TECHNICIAN / RIGGER
ACERGY - GREATER PLUTONIA
02.2007 - 05.2007
SERVICE ENGINEER / ELECTRICAL TECHNICIAN
NAMPAK
04.2005 - 01.2007
PRODUCTION AND MAINTENANCE TRAINER
COMCO SA
03.2004 - 11.2004
SPECIALIST ARTISAN
NAB (ABI) - COCA COLA
01.2000 - 02.2004
ELECTRICAL TECHNICIAN / INSTRUMENTATION TECHNICIAN
SA NYLON SPINNERS
02.1995 - 11.1999
ELECTRICAL TECHNICIAN
MOSGAS
01.1990 - 12.1994
MAINTENANCE ELECTRICIAN
UNITED TABACCO COMPANY
06.1988 - 12.1989
APPRENTICE ELECTRICIAN
PALABORWA MINING COMPANY
02.1981 - 05.1988
Some College (No Degree) - Electrical
Cape Technicon