ADRIAN GOVENDER

At Sherwin electrical I did down lighting/ lights .I also did wiring in a complete new house for a client with complete installation of B.D BOARDS and other electrical matters

◇ My job was working as an Electrical Fitter was Involve in manufacture,

• Fitting,

• Assemble,

• 0perate,

• Troubleshoot and provide maintenance services of critical plant and infrastructure

• Install and repair low voltage primary equipment and associated cabling

• Installs, tests, maintains and repairs electrical installations and wiring in accordance with regulations and specifications assembles,

• Installs

• Tests, commissions, maintains and repairs electrical systems and equipment.

◇ SKILLS:

◇ Mechanical aptitude, It might seem obvious, but not everyone has an Innate sense of mechanics, Problem-solving skills, Diagnosing and repairing electrical problems is a large part of a technician's job, Reading comprehension, Business skills, Customer service skills, Correctly use and maintain the tools of the trade including power tools, test equipment and measuring instruments, Install all types of commonly used wiring and wiring accessories, Install electrical equipment such as motor starters,controllers, switchgears, switchboards, bus bars, transformers and control panels, Locate and repair faults in electrical installations and equipment, Identify different types of cables and wires, Carry out mechanical fitting and assembling works relevant to heavy current equipment, and machine or fabricate parts for such equipment, Install meters, instruments, relays and protection equipment, Read and interpret simple electrical specifications, wiring and circuit diagrams, and building plans, Inspect test, commission and maintain electrical installation and equipment, Use safety equipment, and protective devices and equipment, Correctly instruct, supervise and transfer skill to any apprentice and semi-skilled worker assigned to him to ensure safety and quality of work.

My Knowledge of:

◇Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices, Single and three-phase circuits, earth circuits, insulating and conducting materials, switch fuses and isolators, Electrical wiring diagrams, symbols, engineering drawings and layout drawings for electrical systems, Use of test equipment and measuring instruments, Basic workshop practice, engineering materials, conduit and wiring, Electric motors, starting methods and control equipment, Procedures for inspection, testing and certification of electrical fixed installations, Industrial hazards, safety and health precautions, and environmental concerns, Installation practice and regulations, and relevant codes of practice, Relevant ordinances and regulations.

• Improved system efficiency by conducting thorough electrical inspections and maintenance tasks.
• Enhanced workplace safety by diligently following industry standards and company protocols for electrical fittings and installations.
• Optimized energy consumption by regularly updating and upgrading electrical systems and equipment.
• Completed complex wiring projects within tight deadlines, ensuring minimal downtime for clients.

At Abby’s Woodworks manufacturing furniture's and operating machinery to design the desired furniture's required by clients.

◇ Skills : Physical strength, Communication, Attention to detail, Cut Dovetail Joints ,Finish Your Furniture, Use a Hand Plane, Prep Lumber With Hand Tools, Cut Dovetail Joints, Cut a Mortise and Tenon Joint, Finish Your Furniture, Ability to use, repair and maintain machines and tools, Knowledge of building and construction, Design skills and knowledge, Be thorough and pay attention to detail, Excellent verbal communication skills, Able to work well with others, Able to use your initiative

As a fitter I was involved in the design, cutting, and building of furniture using different types of wood. You could be working on site, in client’s homes, or in a workshop.

◇My job role of a fitter involves the following duties:

• Measuring

• Marking up

• Cutting,

• Shaping,

• Fitting and finishing timber

• Using a range of hand and power tools

• Installing floor joists, floorboards

• Roof trusses and wall partitions

• Fitting interiors such as staircases

• Doors skirting boards

• Cupboards and kitchens

• Putting up frames for bridges roads, dams and buildings

• Drawing and working with technical drawings

• Gaining knowledge of different types of wood and their uses, Working in residential or commercial buildings, Restoring historical buildings, Working in a workshop, a client’s business or home, or on a construction site ,Carrying out jobs in dusty conditions, or working outdoors in all weather and at height, Able to use a computer and the main software packages confidently
• Enhanced production efficiency by accurately interpreting blueprints and specifications for various projects.
• Reduced downtime by performing preventative maintenance on equipment, ensuring smooth operations.
• Streamlined assembly processes with precise measurements and cutting, resulting in improved quality of finished products.
• Collaborated with team members to complete tasks on schedule, maintaining high standards of workmanship.

◇ Tc Saws is specialized in manufacturing of Cutters, Tool Making, Tungsten Grinding and Precision Engineering since its inception in 2004.

◇I worked on the milling machine and the lathe machine, I was trained how to turn bearings and to turn other parts such as bearing housing, cutting gears, do thread cutting, I was trained how to cut groves, angles on the milling machine, I learned how to change and adjust the angles and sizes on the milling machine, I learned how to set up the milling, do change overs to set up for new jobs.

• Enhanced production efficiency by accurately interpreting blueprints and specifications for various projects.
• Reduced downtime by performing preventative maintenance on equipment, ensuring smooth operations.
• Streamlined assembly processes with precise measurements and cutting, resulting in improved quality of finished products.
• Collaborated with team members to complete tasks on schedule, maintaining high standards of workmanship.
• Assisted in training new employees, sharing technical knowledge and best practices for efficient operations.
• Applied strong problem-solving skills to address unexpected challenges that arose during the fitting process.
• Maintained accurate records of job progress, materials used, and time spent on each task to support accurate billing and inventory management.

An understanding of the workplace and the employee's responsibilities (e.g. time keeping, appearance, customer care) self-evaluation skills, Positive attitude to learning, Flexible approaches to solving problems, Adaptability and positive attitude to change, Confidence to set goals, reflect and learn from experience

◇ In my job field I was required to work with surface grinding machine,

• Milling machine

• Centreless grinding machine

• Skimming machine

• Lathe machine

◇ I also gained more knowledge on reading and understanding drawings/ job cards, shadow graph, I also used all measuring equipment ( Vernier, Micrometre, 3 Point Micrometre) I also worked in the cnc Plant in Microfinish and in the Manufacturing Grinding Plant where I Manufacture valve guides and valve seats for Automotive Industry

◇ I worked as a setter and operator on the ge fongs and other cnc machines I was trained and learned how to setter the ge fongs how to program and do change overs also how to adjust sizes did internal threads and external threads on the ge fongs

◇ I also gained a lot of knowledge about production and of combining various material inputs and immaterial inputs (plans, know-how) in order to make something for consumption (output) and also of creating an output , a good or service which has value and contributes to the utility of individuals and to ensure that all products are manufactured with utmost efficiency and quality, according to planned protocols using the appropriate technology and understand materials science related to industrial manufacturing, aeronautical design, mechanical engineering and production applications.

 Microfinish was originally established in 1986 as a niche market supplier of Valve Guides and Valve Seat Inserts to OE and Aftermarket customers. There has been a fresh organisational culture that has emerged – one that we are very proud of. The rejuvenated energy encourages all our staff to actively participate in the constant improvement process and it is their input which has resulted in the Microfinish of today. We place tremendous importance on our ability to analytically measure our quality and output, so that we are able to make informed decisions and our staff play an integral role in this process. Microfinish is an international manufacturer of valve train components for OE and OES markets in the developed world. The company services the automotive, locomotive, marine and yellow goods industries.

• Improved production efficiency by accurately setting up machinery and equipment for smooth operations.
• Reduced machine downtime by conducting regular maintenance checks and addressing issues promptly.
• Enhanced product quality with meticulous attention to detail during machine setup and calibration.
• Streamlined workflow processes, resulting in increased productivity and reduced waste.
• Collaborated with team members to optimize production schedules and meet deadlines.
• Assisted in the training of new setters, ensuring consistent work standards across the team.
• Ensured adherence to safety protocols, maintaining a safe working environment for all staff members.
• Conducted thorough quality inspections, identifying potential issues before they impacted final products.
• Resolved technical issues efficiently, minimizing disruptions to production schedules.
• Kept work areas orderly and clean for maximum productivity.

◇ Being a great mechanic involves more than identifying problems, repairing or replacing worn parts and knowing the difference between the camshaft and Crankshaft.

◇Diagnostic skills, Work ethic, Problem-solving skills, Technical aptitude, A wide array of knowledge. My Knowledge as a services motor mechanic:

◇ Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction, Engineering and Technology

- Knowledge of the practical application of engineering science and technology, This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services, Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

In my job field as a services motor mechanic I was required to work with

• engines and to performs maintenance,

• diagnostic testing,

• repairs, and inspections of small trucks and cars,

• I work on engines,

• drive belts,

• transmissions and electronic systems such as steering, brakes, and accident-avoidance systems, Perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires, Repair or replace worn parts, such as brake pads, wheel bearings, and sensors, Perform repairs to manufacturer and customer specifications, Explain automotive problems and repairs to clients, Perform doing the whole engine rings and bearings replacing new oil seal and head gasket did completely wiring in cars as well as my responsibilities include: Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately, Inspecting vehicle computer and electronic systems to repair, maintain and upgrade, Conducting routine maintenance work aiming to vehicle functionality and longevity, Experience

◇Repairing - Repairing machines or systems using the needed tools, Operation and Control - Controlling operations of equipment or systems, Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times, Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed, Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly, Troubleshooting Determining causes of operating errors and deciding what to do about it, Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions, Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one, Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems, Equipment Selection - Determining the kind of tools and equipment needed to do a job.

• Collaborated with team members to complete tasks on schedule, maintaining high standards of workmanship.
• Troubleshot complex mechanical issues, developing effective solutions that minimized disruptions to project timelines.
• Applied strong problem-solving skills to address unexpected challenges that arose during the fitting process.

◇ I worked at Bk Mouldings started at march end because of the COVID-19 was a machine setter ,I worked on the lathe and milling machine, I knew how to read and understand drawings, making of moulds and tools using steel and polyurethane, on the lathe and milling machine.

◇ I machine brush for cars, trucks, vans, I also made moulds, patterns, and pins, also machine polyurethane and silicon tools. Machine polyurethane Wheels on the lathe & milling machine was used to machine brush, moulds and polyurethane and silicone on the milling and lathe.

◇ I also gained knowledge and was trained on how to use chemical to make mixes of silicone and polyurethane is use to make strong rubber for cars and wheels also learnt how to make a mould and pattern with polyurethane

◇ Bk Mouldings specialise is mounting, control arm brushers, couplings

• Streamlined workflow processes, resulting in increased productivity and reduced waste.
• Enhanced product quality with meticulous attention to detail during machine setup and calibration.
• Reduced machine downtime by conducting regular maintenance checks and addressing issues promptly.
• Improved production efficiency by accurately setting up machinery and equipment for smooth operations.
• Assessed manufacturing processes to diagnose and resolve issues affecting product quality.

◇ I worked at Southway conveyors & Maintenance (6 months contact)

◇ I was a machine setter and fitter & Turner, my duties I worked on the lathe and milling machine and I also did welding and assembling conveyors up, I also went out on site to assemble and do maintenance on comuster conconveyors also did fault finding on site for the comuster , as a fitter and Turner for southway conveyors and maintenance my duties was fitter and resembling variable types of conveyors: Roller Conveyor , Belt Conveyor , Overhead Conveyor / Monorail , Builders/Troughed conveyors , Loading Conveyor , Hydraulic Jack/ Turn Tables , Trolleys/ Transfer unit /Racking , Chain / Slat Conveyor , Hydraulic jacks , Sushi Conveyors

◇ Components I worked on and fitter on conveyors systems: Rollers , Belts , Chain , Bearings , Housings  I was a team player was in charge of team on site my manager gives me orders I give it to the team

that I work with and also use to help the team out

◇We did installing new conveyors system for factories and engineering companies, restaurants,

automotive industry companies

◇ Southway Conveyors and Maintenance Specialist in the manufacturer, installation and maintenance of conveyors systems in kzn, South Africa

• Reduced machine downtime by conducting regular maintenance checks and addressing issues promptly.
• Resolved technical issues efficiently, minimizing disruptions to production schedules.
• Kept work areas orderly and clean for maximum productivity.
• Maintained equipment in good working order by inspecting components and performing basic repairs.

[PERMANENT]

◇I worked for swift chemicals, I started off as a plan operator working with chemicals , decanted chemicals from the tanker to flowbins and drums ,25lt & 5lt also served comuster and filled the product that there need. I also know how to blend chemical's the product that was blended and other types of blend. Then moved on to maintenances department did tank service and fitted new tanks and pipes did pump assemble for the new tanks also did service on forklifts and the trucks also serviced the chemical pumps. Then I became the maintenances supervisor my instructors came from my manager and boss when I received the task that need to be done I was hard of the maintenances group I pushed them to complete the task that was given and I made sure it was completed.

♡ Then there saw my skills as a maintenances supervisor , then there decided to bring me as a plant supervisor for the team, I had supervisor dayshift and nightshift , my orders came from my manager for both teams and i was super hard on both the shift I was strict on them I made sure ordered was done on both the shift , production was on the flow managed the tankers that came in to offload and comuster that bought goods did the tanker paper work and lot other paperwork. Did stock take and managing the warehouse. I also managed cross bored trucks that comes to load did there paper work also make stickers for the flowbin and drums on the computer I was great team player my team had respect for me there did the duty's that was given, my boss was happy when I had control of the stuff and the job and the tanks was getting emptied and loading cross bored trucks on time everything was on flow. I also worked as a QC chemistry where I use to check for water on the chemical and run other testing techniques and methods on the machine

[PERMANENT]

◇Worked for Samson's engineering as fitter and Turner

I worked on the cnc machine the cnc lathe and milling machine was a operator, i also learnt on the cad program laser machine how to setter and use the cad software program, worked on the manual lathe and milling machine, I also gained knowledge on the engineering field and the differed kind of parts was made , I was also learned how to do sales rep and experience in comuster service.

My duties as a fitter and Turner for Samson's engineering was manufacture and construct components for machinery and use power operated tools such as lathes, milling machine and drilling machines I also maintain and repair many different kinds of machines. I was also responsible for the assembling and fitting of new components and equipment.

◇My duties and tasks

•Assembles and fits components for machinery, Maintains and repairs machinery, Uses blueprints/plans to measure material for production, Monitors machinery and repairs faults, Fits parts required to complete the machine, Drill and tap holes, Overhaul valves, M aintain and align couplings, Tension and align V-belts; and Use machinery (such as lathe and milling machine) to manufacture components.

◇ skills and abilities I have as Fitter and Turner

•Good at working with your hands;

• Must be very mechanically minded;

• Must be able to take exact measurements and work accurately;

•Must be mathematically minded;

•Must be able to concentrate under noisy working conditions; and Be able to read three-dimensional drawings.

◇I worked for for basf as a sub-contractor Germany's largest chemical company and one of the largest in

the world

◇ Speciality chemicals are only one part of basf broad production program, which is divided into the Chemicals, Materials, Industrial Solutions, Surface Technologies, Nutrition & Care, and Agricultural Solutions segments

◇ Speciality Chemicals - part of the Performance Materials segment - primarily includes polyurethanes, thermoplastics, foam specialities, and industrial applications. My duties was working as a mantancies mechanical fitter which was to maintain the pumps for the tanker that the pumps had the coolant in, fitter never pumps and pipes for new tankers all fitter tanker did pipe bending and cooling systems for tankers and pumps and the pipelines , did the plant service and installing new parts , services motor's in the plant and machine's system

◇I fitter gearboxes and motor for tankers and shafts that fit it to the motor with blades to keep the

chemical mixing.

♡ I also did pipe fitting install, maintain and repair various piping systems using advanced technical expertise and highly specialised skills was also responsible for installing, assembling, maintaining, and repairing piping systems, also work with cooling, fuel transport, heating, scorching water, hydraulics, steam, and ventilation.

skills to assemble and repair pipes, such as:

• Cutting, Threading, Brazing, Bending, Soldering, Grooving, Fabricating, Tubing, Welding

◇My Duties as a pipe fitter:

•Read And Plan Based On Engineering Drawings

• Fabricate Pipe Spools In A Workshop  Install Pipework

•Planned Maintenance Checks

•Find And Fix Faults

•Emergency Call-outs

• Improved equipment performance by conducting regular maintenance checks and repairs.
• Ensured safety compliance by performing routine inspections and adhering to established protocols.
• Increased productivity with the timely replacement of worn parts and maintaining optimal machine conditions.

[3 Months Contract Shutdown]

◇I Worked at Sancryl chemicals in the maintenance department as fitter and Turner , I worked with pumps that is use to feed the chemical into the tankers , I also worked with the gearboxes and motor for the bulk tankers that stores the chemical in the maintenance department working with pipes and tankers , pumps , motor & gearboxes , shafts , Hot and cold water valves inlet and outlet , disassembly pump's and gearboxes & motors , even fitter complete new gearbox and motor

◇ In the maintenance department was to fixes and change pipes to keep the plant manufacturing and

maintain the tankers and pump's from breaking down and the gearboxes & motor

◇I gained a lot of knowledge and experience at Sancryl chemicals in the maintenance department

◇Sancryl chemicals there produce chemicals for paint and other chemicals , Sancryl is a leading BEE manufacturer of liquid emulsion polymers and surfactants, with specialist local knowledge , Sancryl contributes to value creation with innovative and sustainable solutions for customers from many industries

◇Their portfolio is designed to meet very specific customer needs with precision

◇Specifically, we design superior polymer products and surfactants for paints and adhesives, building and construction, architectural and specialty coatings, and paper and textiles, industrial water treatment, detergents, agriculture, ceramics and mining. Sancryl also manufactures kosher products for use in the food and allied industries

◇Sancryl has recently been concentrating its latest product and process developments to the field of

‘sustainable environment development' and on ‘community development'

◇I also gained a lot of knowledge about the different types off product that there make and experience

work with those chemicals and with the team.

My duties at Sancryl chemicals was

•reads and understands diagrams and piping plans

•assembles pipes and fits pipes

•welds, solders, cements and threads

• checks and does routine maintenance

• trouble-shoots and repairs problems

[SUBCONTRACTOR]

I Working for Power and Voltage Services Subcontractor for C&J Automotive industry. My duties working as a fitter and Turner to put fit in power cable and cable trays and power boxers on. As a Electrical mechanics and fitters my job was to fit, adjust, install and repair electrical machinery and other electrical apparatus and equipment in buildings, factories, workshops, and on other site. My Daily tasks was involve:

• Examining electrical machinery for faults • Installing electrical equipment

Designing electrical systems and products •Making models and prototypes  Attending meetings on-site

•Checking electrical systems to make sure they're safe

•Repairing electrical motors  Installing lighting systems

• Fitting electrical wiring and sockets

◇ My Main Tasks was involved:

• fitting, adjusting and repairing various kinds of electrical machinery and motors, generators, switchgear

and control apparatus, instruments, or electrical parts of elevators and related equipment

• fitting, adjusting and repairing electrical parts in domestic appliances, industrial machines and other

appliances

•inspecting and testing manufactured electrical products

•installing, testing, connecting, commissioning, maintaining and modifying electrical equipment, wiring

and control systems

•designing, installing, maintaining, servicing and repairing electric and hydraulic passenger and freight lifts, escalators, moving walkways and other lift equipment

• connecting electrical systems to power supply

•replacing and repairing defective parts.

•occupations classified what job i did on site - Armature builder - Electrical generator fitter - Electrical mechanic - Lift mechanic

Great attitude in the workplace, professional and very cautious and considerate when it comes to safety. The practical experience is a great way to learn and gain experience. Good workmanship and good team work, Mondi is developing and manufacturing sustainable consumer and industrial packaging solutions using paper and producing pulp, paper and films.

◇I Working at mondi as a mechanical fitter , worked at finishing plant , worked on the agitactor, also worked on the winders and worked on the form roller wash machine , worked on paper machines and auxiliary hardwood pulpling plant , worked on additives and winders, Boilers , worked on various types of projects and machines in the plant from Maintenance and breakdown repairs , Removal and installation of valves and motor , other plant equipment , Responsible for maintenance of plant specific equipment , Fit and Assemble metal parts to production machines and other equipmen in the plant and engineering techniques to maintain and repair mechanical plant machinery and equipment to operational standards , Piping, Preventive Maintenance, Gearboxes, Crane

Operator, Valve, Grinding and Milling. I worked at PM31 Maintenance department which involved all the paper machines, winders, motors PM31 was involving with all the maintenance in the PM31 department where service was due and dissassembling and reassembling with new parts.

[SHUTDOWN]

◇ I worked at the pongola sugar mill for a 2 and a half weeks shut down as a mechanical fitter, worked in the maintenance department work at Front end and at Boilers also at the backend on the sugar mill, dissassembling and reassembling the machines and parts, even servicesing the parts in the plants .

• Improved equipment performance by conducting regular maintenance checks and repairs.
• Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
• Performed onsite maintenance and repair work.

[SHUTDOWN]

I worked at Toyota in the body shop as a mechanical fitter remove robotic, disassembled the robotic, installing new robotic bases and re lining up the robotic bases and assembled the new robotic in.